GRACE INERTIA CONN 2.5 ON TAPE HDR 5P NA
| Weight | 0.05 kg |
|---|---|
| Manufacturer | TE CONNECTIVITY/AMP BRAND |
| Part Number | 5-1747072-5 |
| PRC | AMP |
| Agency/Standard | UL |
| Centerline (Pitch) | .098 in 2.5 mm |
| Circuit Application | Signal |
| Connector & Contact Terminates To | Printed Circuit Board |
| Connector Height | .444 in 11.3 mm |
| Connector Length | .59 in 15 mm |
| Connector Mounting Type | Board Mount |
| Connector System | Wire-to-Board |
| Contact Base Material | Brass |
| Contact Current Rating (Max) | 3:00 AM |
| Contact Layout | Inline |
| Contact Mating Area Plating Material | Gold |
| Contact Mating Area Plating Material Thickness | 11.81 µin .3 µm |
| Contact Type | Tab |
| Contact Underplating Material | Nickel |
| Glow Wire Rating | Standard Part - Not Glow Wire |
| Header Type | Fully Shrouded |
| Housing Material | Nylon |
| Mating Alignment | With |
| Mating Alignment Type | Polarization |
| Mating Retention | With |
| Mating Retention Type | Latch |
| Mating Tab Thickness | .02 in .5 mm |
| Mating Tab Width | .028 in .7 mm |
| Number of Positions | 5 |
| Number of Rows | 1 |
| Operating Temperature Range | -30 – 105 °C -22 – 221 °F |
| Operating Voltage | 50 VAC 50 VDC |
| Packaging Quantity | 450 |
| Packaging Type | Tape |
| Panel Mount Feature | Without |
| PCB Connector Assembly Type | PCB Mount Header |
| PCB Contact Termination Area Plating Material | Tin |
| PCB Contact Termination Area Plating Material Finish | Matte |
| PCB Contact Termination Area Plating Material Thickness | 78.74 µin 2 µm |
| PCB Mount Alignment | Without |
| PCB Mount Orientation | Vertical |
| PCB Mount Retention | Without |
| PCB Thickness (Recommended) | .063 in 1.6 mm |
| Primary Product Color | Natural |
| Sealable | No |
| Termination Method to Printed Circuit Board | Through Hole - Solder |
| Termination Post & Tail Length | .11 in .661 in 16.8 mm 2.8 mm |
| UL Flammability Rating | UL 94V-0 |
