HD Power Conn PTL 1X2 PCB HEADER R/A HITEMP KEY A
| Weight | 0.05 kg |
|---|---|
| Manufacturer | TE CONNECTIVITY/AMP BRAND |
| Part Number | 1-1969694-2 |
| PRC | AMP |
| Agency/Standard | UL VDE |
| Approved Standards | UL E28476 |
| Centerline (Pitch) | .236 in 6 mm |
| Circuit Application | Power |
| Connector & Contact Terminates To | Printed Circuit Board |
| Connector & Housing Type | Receptacle |
| Connector Mounting Type | Board Mount |
| Connector System | Wire-to-Board |
| Contact Base Material | Copper Alloy |
| Contact Current Rating (Max) | 19.5 A |
| Contact Layout | Inline |
| Contact Mating Area Plating Material | Tin |
| Contact Retention Within Housing | With |
| Contact Type | Pin |
| Glow Wire Rating | GWT 850°C (Flame = 30 sec) |
| Header Type | Fully Shrouded |
| Housing Color | Gray |
| Housing Material | Nylon |
| Mating Retention | With |
| Mating Retention Type | Latch |
| Number of Positions | 2 |
| Number of Power Positions | 2 |
| Number of Rows | 1 |
| Operating Temperature Range | -55 – 150 °C -67 – 302 °F |
| Operating Voltage | 600 VAC 600 VDC |
| Packaging Method | Carton |
| PCB Contact Termination Area Plating Material | Pre-Tin |
| PCB Mount Alignment | With |
| PCB Mount Orientation | Right Angle |
| PCB Thickness (Recommended) | .062 in 1.58 mm |
| Sealable | No |
| Termination Method to Printed Circuit Board | Through Hole - Solder |
| Termination Method to Wire & Cable | Crimp |
| UL Flammability Rating | UL 94V-0 |
| UL Rating | Recognized |
Wire-To-Board Connector 24 AWG 2.54 mm 8 Contacts
Circular MIL Spec Connector ER 35C 35#16 SKT PLUG
CONN SMA JACK STR 50OHM EDGE MNT
